Michael Collins Selmer-Style Gypsy Guitars

Ebonized hollow rosewood bridge

Ebonized hollow rosewood bridges, 12.5 long, 1.5 wide, and in any height necessary (within reason) to get the desired action for your guitar:

$60.00

Moustache end trim to match the above bridge:

$15

MEASUREMENTS

Here are the measurements we need to make a custom bridge. Use a six inch stainless steel rule that measures in 32'nds of an inch.

1. Measure the length of the overall bridge to be replaced. Do not include the moustache.

2. Measure the overall bridge width.

3.Measure the distance between the soundboard and the bottom of the Low e string.

4. Measure the distance between the soundboard and the bottom of the High e string.

5. Measure the distance between the two e strings at the top of the bridge.

6. Measure the distance between the top of the 12th fret (resting on the actual fret, not the fingerbaord)
and the bottom of the Low e string.

7.Measure the distance between the top of the 12th fret (resting on the actual fret, not the fingerbaord) and the bottom of the high e string.

Be sure to keep any shims in place when taking the above measurements.